Casting defect
Author: Date: 2015-12-3 14:28:18
A casting defect is an undesired irregularity in a metal casting process. Some defects can be tolerated while others can be repaired,otherwise they must be eliminated. They are broken down into five main categories: gas porosity,shrinkage defects,mold material defects,pouring metal defects,and metallurgical defects.
Terminology
The terms "defect" and "discontinuity" refer to two specific and separate things in castings. Defects are defined as conditions in a casting that must be corrected or removed,or the casting must be rejected. Discontinuities,also known as "imperfections",are defined as "interruptions in the physical continuity of the casting". Therefore,if the casting is less than perfect,but still useful and in tolerance,the imperfections should be deemed "discontinuities".
Types
There are many types of defects which result from many different causes. Some of the solutions to certain defects can be the cause for another type of defect.
The following defects can occur in sand castings. Most of these also occur in other casting processes.